推薦產品
常州市恒海干燥設備有限公司
公司電話：0519-86922899
公司傳真：0519-86923299
公司地址：江蘇省常州市武進區焦溪鎮工業園區
GK干式制粒機
特點 Featrures
◎ 干粉顆粒密度均勻，崩解度好，成料率高。
◎ 特殊的送料結構，保證有效送料。
◎ 軋混水循環冷卻，保證不會出現物料粘輥現象。
◎ 不需要水或乙醇等潤濕劑，不需要二次加熱干燥，工序少，工效高，成本低。
◎ 采用先進的電動液壓，操作簡單可靠，自動化程度高。
◎ 密封操作無污染，滿足藥品衛生要求。
◎ 特別適用于濕法無法解決的物料造粒。
◎ The dry powder grain density is uniform .The disintegration is good .The grain making rate is high.
◎ The special material conveyor structure will ensure the effective material sending.
◎ The roll cool circulation will ensure that there is no phenomenon that the materials stick to the roll.
◎ It is not necessary to use the water,alcohol and other wet agent.There is no need of twice heating and drying.The operation procedure is less. The machine is high in operation efficiency and low in the cost.
◎ The machine uses the advanced electric and hydraulic driving.it is simple and reliable in the operation and high in the automation grade.
◎ With the enclosed operation,there is no pollution,which meets the pharmacy health requirements.
◎ The machine is especially suitable for the material grain making that can not be made by the wet method.
-----------------------------------------------------------------------------------------------------------------
技術參數 Technical parameters
型號 spec |
生產能力 capacity(kg/h) |
料斗容積 hopper(L) |
軋輥尺寸 roller size(mm) |
軋輥最大預壓力 max. roller prepressure(Mpa) |
液壓系統最大工作預壓力 max. operation pressure of the (Mpa) |
輥輪及送料速度調節形 |
40 |
5-20 |
3 |
Φ120×40 |
6 |
8 |
變頻調速 inverter control |
80 |
20-60 |
3 |
Φ200×80 |
10 |
15 |
變頻調速 inverter control |
120 |
30-100 |
3 |
Φ200×120 |
10 |
15 |
變頻調速 inverter control |
